'15 mm'

Mounting Rails (channels) manufactured and Exported by AKcelport comply with DIN/IEC standards (IEC 60715 - Dimensions of low-voltage switchgear and control gear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and control gear installations). DIN rails are available in 35 mm Top Hat section (7.5 mm and 15 mm deep), 32 mm ("G" Section) and 15 mm width. These channels are made of mild steel. Channels of 300, 500 and 1000 mm (with or without slot) are available as standard lengths. All channels are Alkaline Zinc plated with yellow or blue passivation. Channels with RoHS compliant plating are also available against special orders. Dimensional accuracy is ensured through gauging during manufacturing process. It is important that the channels used have accurate dimensions within permissible tolerances. If the mounting dimensions are less than specified then the attachment of the terminal blocks on these rails will not be strong enough and there could be problems of loose fittings and at times terminal blocks may get dislodged from the channel even in normal service conditions. If the mounting dimensions are more than specified limits, the terminal will fit tighter than required and it would be difficult to move terminals on the rail or dismount it from the rail. At times this may lead to breakage of terminal blocks made from Melamine (thermoset).

The Steel DIN Rails are available in sizes to suit all types of Terminal Stations, MCBs and other rail mounted devices. Our Rails are RoHS Compliant. Sizes 35 x 7.5 mm 35 x 15 mm 32 x 15 mm (G Section) 15 x 5 mm The Standard lengths available are 1 meter or 2 meter. Please mention the length while ordering.

An easy and economical solution for switchgears, panels, switchboards, and transformers. Features: Material : Electrolytic Copper Finish : Natural / Tin Electroplated Length : Upto 2 meters Thickness : 1mm to 10mm Width : 10mm upto 200mm Variants : Solid Busbars, Punched Busbars, Threaded Busbars

TYPE A - 12.7MM X 12.7MM 7 WAY TO 36 WAY

We offer standard brass neutral bars in sections of 7mm x 9mm, 8mm x 12mm, 19mm x 9.5mm, 12.7mm x 9.5mm having wide applications in distribution / panel boards. Both single screw per tunnel as well as double screws per tunnel can be made available as required from 6 ways, 12 ways, 18 ways, 24 ways, 30 ways, 36 ways, 42 ways, 48 ways, 60 ways upto 72 ways. We have listed some of the designs we manufacture in brass neutral bars. Other than these, we can also cater to any specific customer designs with respect to bolt hole, terminal holes, length and cross-section of brass neutral bars. The bars are generally with fine surface finish and standard MS screws duly zinc plated. The option of cheese head screws or Philips head screws are also available.

We offer a variety of Test Terminal Block / Test Blocks developed as per International Standards conforming to IEC- 60947-7-1 The test terminal blocks are used for easy access during on site testing of Ammeters, KWH Meters, Maximum Demand Indicators, Trivector Meters, Relays and Instrument Transformers without disconnecting from load and avoid CT open circuit problems. Connections for testing can be easily made. The Test Terminal Block therefore becomes an important element of the Metering Solution. The Test Terminals Blocks are designed for projection mounting with either front or back connection possibilities, designated with FC or BC. The Test Terminal Blocks are for 3 phase, 3 wire or 3 phase 4 wire application for up to 50 A continuous rating at 600 V. PRODUCTS :- TTB 13 Way 3Ph 4 Wire FC ( Standard) TTB 13 Way 3Ph 4 Wire BC ( Standard) TTB 13 Way 3Ph 4 Wire FC & BC ( Disconnection Type ) Test Block 4 Way Test Block 6 Way Test Block 10 Way

The Test Blocks offer easy access for on site testing of Ammeters, KWH Meters, Maximum Demand Indicators, Trivector Meters, Relays and Instrument Transformers without disconnecting from load and avoid C.T. open circuit problems. Connections for testing can be easily made. The Test Block therefore becomes an important element of the Metering Solution. The Test Blocks are designed for projection mounting with front connection possibilities, designated with FC. The Test Blocks are for 3 phase, 3 wire with Neutral application for up to 50 A continuous rating at 600 V and generally conform to IEC 60947-7-1. The most popular 10 Way TTB has 10 Terminals in total, of which 6 are current terminals, 3 are voltage terminals and 1 are Neutral. The current terminals are separated into groups of 2 with inter-terminal shorting links for shortcircuiting of the CT terminals and testing. The base of the Test Block is made of excellent quality electrical grade black bakelite moulding powder. The base moulding is provided with integrally moulded barriers between the terminals for complete protection against flashovers. In addition, a bakelite shield is provided in front to avoid flashover or shorting at cable entries. A moulded shroud is provided for safety against the voltage terminals. We are engaged in manufacturing an extensive range Test Block 10 Way which are made by using premium quality raw material. These are known for smooth surface finish, long service life, durability and reliability. Our range caters to the needs of varied industries and are used in test equipment such as transformer ratio-meters and instrument transformer.

The most popular 13 Way TTB has 13 Terminals in total, of which 9 are current terminals and 4 are voltage terminals. The current terminals are separated into groups of 3 with inter-terminal shorting links for shortcircuiting of the CT terminals and testing. The base of the Test Terminal Block is made of excellent quality electrical grade black bakelite moulding powder. The base moulding is provided with integrally moulded barriers between the terminals for complete protection against flashovers. In addition, a bakelite shield is provided in front to avoid flashover or shorting at cable entries. A moulded shroud is provided for safety against the voltage terminals. For viewing the inside connections without removing the cover, thus saving time of the Operator, a transparent, sturdy and flame retardant (UL94V0) polycarbonate top cover is provided. Optionally, the top cover is offered bakelite. The top cover is secured in place by knurled knobs and sealing arrangement is provided to prevent unauthorized access. The Test Terminal Block can be fitted to any panel by means of 4 holes provided on the base. All terminals, shorting links, screws, nuts, etc., used in the electrical connections are of are bright nickel-plated brass to prevent corrosion and providing high conductivity. The screws are provided with rounded edges to prevent any damage to cable strands. Each terminal has a 6 mm dia hole for cable entry and two M5 screws secure the cables. For the Back Connected Test Terminal Blocks, colour coded sleeves of red, yellow and blue are provided to indicate We offer 9 Way Test Terminal Blocks, special design 13 Way Terminal Blocks and Test Terminal Blocks with Voltage Disconnect against specific requirement.

Product : UL Certification • All Dimensions are in MM TL : Effective Thread Length All Insulators arecertified For technical details of Busbar support & Insulator