'safe electrical connection'

The Test Blocks offer easy access for on site testing of Ammeters, KWH Meters, Maximum Demand Indicators, Trivector Meters, Relays and Instrument Transformers without disconnecting from load and avoid C.T. open circuit problems. Connections for testing can be easily made. The Test Block therefore becomes an important element of the Metering Solution. The Test Blocks are designed for projection mounting with front connection possibilities, designated with FC. The Test Blocks are for 3 phase, 3 wire with Neutral application for up to 50 A continuous rating at 600 V and generally conform to IEC 60947-7-1. The most popular 10 Way TTB has 10 Terminals in total, of which 6 are current terminals, 3 are voltage terminals and 1 are Neutral. The current terminals are separated into groups of 2 with inter-terminal shorting links for shortcircuiting of the CT terminals and testing. The base of the Test Block is made of excellent quality electrical grade black bakelite moulding powder. The base moulding is provided with integrally moulded barriers between the terminals for complete protection against flashovers. In addition, a bakelite shield is provided in front to avoid flashover or shorting at cable entries. A moulded shroud is provided for safety against the voltage terminals. We are engaged in manufacturing an extensive range Test Block 10 Way which are made by using premium quality raw material. These are known for smooth surface finish, long service life, durability and reliability. Our range caters to the needs of varied industries and are used in test equipment such as transformer ratio-meters and instrument transformer.

The most popular 13 Way TTB has 13 Terminals in total, of which 9 are current terminals and 4 are voltage terminals. The current terminals are separated into groups of 3 with inter-terminal shorting links for shortcircuiting of the CT terminals and testing. The base of the Test Terminal Block is made of excellent quality electrical grade black bakelite moulding powder. The base moulding is provided with integrally moulded barriers between the terminals for complete protection against flashovers. In addition, a bakelite shield is provided in front to avoid flashover or shorting at cable entries. A moulded shroud is provided for safety against the voltage terminals. For viewing the inside connections without removing the cover, thus saving time of the Operator, a transparent, sturdy and flame retardant (UL94V0) polycarbonate top cover is provided. Optionally, the top cover is offered bakelite. The top cover is secured in place by knurled knobs and sealing arrangement is provided to prevent unauthorized access. The Test Terminal Block can be fitted to any panel by means of 4 holes provided on the base. All terminals, shorting links, screws, nuts, etc., used in the electrical connections are of are bright nickel-plated brass to prevent corrosion and providing high conductivity. The screws are provided with rounded edges to prevent any damage to cable strands. Each terminal has a 6 mm dia hole for cable entry and two M5 screws secure the cables. For the Back Connected Test Terminal Blocks, colour coded sleeves of red, yellow and blue are provided to indicate We offer 9 Way Test Terminal Blocks, special design 13 Way Terminal Blocks and Test Terminal Blocks with Voltage Disconnect against specific requirement.

Akcelport is a thriving business entity engaged in offering high-grade Electrical accessories. We are leading manufacturer of vast range of electrical components like Copper Lugs, Cable Lugs, Aluminum Lugs, Battery Lugs, Tinned Cable Lugs, Bimetallic Lugs, Tubular Cable Lugs, Ring Lugs, Fork Lugs, pin lugs, Electrical Cable Lugs, Ring Terminals, Fork Terminals, pin terminals, Copper Cable Terminals, cable connectors etc These are used for transmitting, joining, continuing, supporting and other safety electrical products used in electrical systems. All our products are in compliance with the International Standards. With the growing technology, we have carved a niche for ourselves as one of the top most manufacturers of Cable Lugs in the domestic as well as the global market. We leave no stone unturned in assuring the quality of our products to our clients. Masking our credibility grow in the concerned sphere of wire and cables, we aim at mastering & developing our manufacturing technological competence.

Features: Easy Installing Screw fitted to make instant connections Suitable for copper conductors Suitable for upto 2000 volts Features of CGB9x12-174: Cost effective and easy to install 174 connections possible Screw fitted to make instant connections Suitable for copper conductors Suitable for upto 600 volts

We offer a variety of Test Terminal Block / Test Blocks developed as per International Standards conforming to IEC- 60947-7-1 The test terminal blocks are used for easy access during on site testing of Ammeters, KWH Meters, Maximum Demand Indicators, Trivector Meters, Relays and Instrument Transformers without disconnecting from load and avoid CT open circuit problems. Connections for testing can be easily made. The Test Terminal Block therefore becomes an important element of the Metering Solution. The Test Terminals Blocks are designed for projection mounting with either front or back connection possibilities, designated with FC or BC. The Test Terminal Blocks are for 3 phase, 3 wire or 3 phase 4 wire application for up to 50 A continuous rating at 600 V. PRODUCTS :- TTB 13 Way 3Ph 4 Wire FC ( Standard) TTB 13 Way 3Ph 4 Wire BC ( Standard) TTB 13 Way 3Ph 4 Wire FC & BC ( Disconnection Type ) Test Block 4 Way Test Block 6 Way Test Block 10 Way

These 4 Way Test Blocks are used for mounting on switchboard panels for use with proper test equipments to facilitate the testing of AC instruments, meters and relays. Technical Features Type TTB4W test blocks are 4-pole blocks, provided with moulded bakelite base and covers that have an arrangement of internal plug contacts, which make a through positive connection when the cover is in place. The contacts in the blocks are of the line pressure type and provide positive contact with minimum contact resistance. For all current circuits, auxiliary contacts are used which automatically short circuit the current transformer when the cover is removed. Routine testing can be accomplished simply by removing the cover and substituting the properly connected test plug. Thereafter, normal connections are restored by replacing the cover. Contact rating is 250 volts, 10 amperes continuously. Each TTB4 Test Block includes the Test Block and cover with a set of uncounted auxiliary contacts, jumpers, and screws in sufficient variety and quantity to provide the combinations to suit any application desired. Details of the Auxilliary Contacts provided are as below: Auxiliary contact C1 is equal to one pole of contact No. 1, to be used in connection with jumper shown in Figure. Auxiliary contact C2 is used to short circuit the current transformer when the cover or plug is not in place. Auxiliary contact C3 is used as bridge to maintain the circuit during the period that the cover or the plug is not in place. Without this connection, loss of revenue is possible because of interrupted operation if the replacement of the cover or plug is long delayed. Auxiliary contact C4 jumpers is to be used in connection with auxiliary contact C2 or C4, to serve the same purpose as C2 in short circuiting a current transformer, or to interconnect phases, when the cover fastening stud is to be bypassed. The Auxiliary contacts are furnished as a standard along with each TTB4w Test Block are - C1 - 1No., C2 - 2 Nos, C3 - 4 Nos. and C4 - 1 No.

Cylindrical and Drum Series of Insulators are made of poly glass polyester material reinforced with fiberglass. They are manufactured in various dimensions and colors for different applications and the available designs are conical, hexagonal, cylindrical and drum series of insulators. The raw material (DMC) has a high electrical, mechanical and physical properties suitable for precarious working conditions. They are molded with electrical grade brass or galvanized steel inserts for mounting. Tailor made insulators can be developed for specific applications.

Mounting Rails (channels) manufactured and Exported by AKcelport comply with DIN/IEC standards (IEC 60715 - Dimensions of low-voltage switchgear and control gear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and control gear installations). DIN rails are available in 35 mm Top Hat section (7.5 mm and 15 mm deep), 32 mm ("G" Section) and 15 mm width. These channels are made of mild steel. Channels of 300, 500 and 1000 mm (with or without slot) are available as standard lengths. All channels are Alkaline Zinc plated with yellow or blue passivation. Channels with RoHS compliant plating are also available against special orders. Dimensional accuracy is ensured through gauging during manufacturing process. It is important that the channels used have accurate dimensions within permissible tolerances. If the mounting dimensions are less than specified then the attachment of the terminal blocks on these rails will not be strong enough and there could be problems of loose fittings and at times terminal blocks may get dislodged from the channel even in normal service conditions. If the mounting dimensions are more than specified limits, the terminal will fit tighter than required and it would be difficult to move terminals on the rail or dismount it from the rail. At times this may lead to breakage of terminal blocks made from Melamine (thermoset).

A1 / A2 GLAND FOR UNARMOURED CABLE To BS 6121: Part 1 Suitable for unarmored, plastic or rubber sheathed cables. Suitable for most indoor and outdoor applications. Seal rated to IP66 Finish : Natural Brass and also available in Electro Tinned and Nickel A2 FLAMEPROOF FOR UNARMOURED CABLE Apart from above benefits they come with these additional benefits For use in Hazardous environments Complies with BS5501 Pt1 and Pt6 A2F for flame proof increased safety applications Threads : Entry threads are metric to BS 3643 and are also available in imperial (ET) Also available in Aluminum (BS 1474) cable glands