Panel Hinges (Lift off Type) are manufactured from extruded Brass rods duly polished and Nickel Chrome Plated, with stainless steel inserts and Philips-recessed hexagonal head screws duly zinc plated. We cover all the standard range dimensions in this product that is being incorporated by the panel board manufacturers worldwide and can also offer any customer required variations against request.

Akcelport is a thriving business entity engaged in offering high-grade Electrical accessories. We are leading manufacturer of vast range of electrical components like Copper Lugs, Cable Lugs, Aluminum Lugs, Battery Lugs, Tinned Cable Lugs, Bimetallic Lugs, Tubular Cable Lugs, Ring Lugs, Fork Lugs, pin lugs, Electrical Cable Lugs, Ring Terminals, Fork Terminals, pin terminals, Copper Cable Terminals, cable connectors etc These are used for transmitting, joining, continuing, supporting and other safety electrical products used in electrical systems. All our products are in compliance with the International Standards. With the growing technology, we have carved a niche for ourselves as one of the top most manufacturers of Cable Lugs in the domestic as well as the global market. We leave no stone unturned in assuring the quality of our products to our clients. Masking our credibility grow in the concerned sphere of wire and cables, we aim at mastering & developing our manufacturing technological competence.

These 4 Way Test Blocks are used for mounting on switchboard panels for use with proper test equipments to facilitate the testing of AC instruments, meters and relays. Technical Features Type TTB4W test blocks are 4-pole blocks, provided with moulded bakelite base and covers that have an arrangement of internal plug contacts, which make a through positive connection when the cover is in place. The contacts in the blocks are of the line pressure type and provide positive contact with minimum contact resistance. For all current circuits, auxiliary contacts are used which automatically short circuit the current transformer when the cover is removed. Routine testing can be accomplished simply by removing the cover and substituting the properly connected test plug. Thereafter, normal connections are restored by replacing the cover. Contact rating is 250 volts, 10 amperes continuously. Each TTB4 Test Block includes the Test Block and cover with a set of uncounted auxiliary contacts, jumpers, and screws in sufficient variety and quantity to provide the combinations to suit any application desired. Details of the Auxilliary Contacts provided are as below: Auxiliary contact C1 is equal to one pole of contact No. 1, to be used in connection with jumper shown in Figure. Auxiliary contact C2 is used to short circuit the current transformer when the cover or plug is not in place. Auxiliary contact C3 is used as bridge to maintain the circuit during the period that the cover or the plug is not in place. Without this connection, loss of revenue is possible because of interrupted operation if the replacement of the cover or plug is long delayed. Auxiliary contact C4 jumpers is to be used in connection with auxiliary contact C2 or C4, to serve the same purpose as C2 in short circuiting a current transformer, or to interconnect phases, when the cover fastening stud is to be bypassed. The Auxiliary contacts are furnished as a standard along with each TTB4w Test Block are - C1 - 1No., C2 - 2 Nos, C3 - 4 Nos. and C4 - 1 No.

We manufacturer and offer a superior range of Epoxy Insulators that are known as XR bushings. These are fabricated in accordance to international quality standard and using premium quality materials. Our range is widely acknowledged for its flawless performance, durability, reliability and easy installation. These insulators are available in compact designs and accurate dimension. We offer at industry leading price.

Mounting Rails (channels) manufactured and Exported by AKcelport comply with DIN/IEC standards (IEC 60715 - Dimensions of low-voltage switchgear and control gear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and control gear installations). DIN rails are available in 35 mm Top Hat section (7.5 mm and 15 mm deep), 32 mm ("G" Section) and 15 mm width. These channels are made of mild steel. Channels of 300, 500 and 1000 mm (with or without slot) are available as standard lengths. All channels are Alkaline Zinc plated with yellow or blue passivation. Channels with RoHS compliant plating are also available against special orders. Dimensional accuracy is ensured through gauging during manufacturing process. It is important that the channels used have accurate dimensions within permissible tolerances. If the mounting dimensions are less than specified then the attachment of the terminal blocks on these rails will not be strong enough and there could be problems of loose fittings and at times terminal blocks may get dislodged from the channel even in normal service conditions. If the mounting dimensions are more than specified limits, the terminal will fit tighter than required and it would be difficult to move terminals on the rail or dismount it from the rail. At times this may lead to breakage of terminal blocks made from Melamine (thermoset).

CABLE DUCTS Wide Slot is the product, available in wide range to accommodate wires and cables for the smallest wall mounted panel to larger integrated systems.

We are unit non-commissioned amongst the foremost names within the business, providing a large variety of Marine kind Cable Glands. These areas units are utilized in plastic, sheathed cables, and SWA cables, that area units are obtainable with optimum practicality, completely different sizes, varied styles, completely different finishes, and correct dimensions as per customer’s specifications with longer service life and {price|and value} effective price. Our high-quality reliable Marine Cable Glands area unit wide utilized in varied applications in numerous businesses, that satisfy quality standards and pointers, therefore, this area unit is extremely appreciated by our valuable patrons. We have a tendency to manufacture these in nickel-plated or chrome-plated finishes. For indoor or outside use with all sorts of unarmored cable. We have a tendency to conjointly manufacture completely different Cable Glands Accessories as per customers’ desires and necessities. Types of Marine Type Cable Glands Marine & JIS Type Cable Glands Size 20 mm to 90 mm (S & L) Standard BS 6121 IP Rating IP66 & 68 Application Outdoor or Indoor for use with all types of Unarmoured Cable. Function A2 type glands provide a single pull resistant seal on the outer sheath of unarmoured cable. Material Brass BS 2874 CZ121 Pb3 Options Threads METRIC, NPT, BSP & PG. Finish Natural Brass Finish, Nickel Finish. Operating Temp Standard seals -20° C to +80° C. Accessories Matching Accessories available like PVC Shrouds, Lock Nuts & Earth Tag.

Akcelport Industries India's largest manufacturer and exporters of Cable Ties offers a comprehensive range of high quality Nylon Cable Ties with best in class tensile strength and endurance. Our cable ties perform very well under varying weather conditions and are exported across the globe

We offer standard brass neutral bars in sections of 7mm x 9mm, 8mm x 12mm, 19mm x 9.5mm, 12.7mm x 9.5mm having wide applications in distribution / panel boards. Both single screw per tunnel as well as double screws per tunnel can be made available as required from 6 ways, 12 ways, 18 ways, 24 ways, 30 ways, 36 ways, 42 ways, 48 ways, 60 ways upto 72 ways. We have listed some of the designs we manufacture in brass neutral bars. Other than these, we can also cater to any specific customer designs with respect to bolt hole, terminal holes, length and cross-section of brass neutral bars. The bars are generally with fine surface finish and standard MS screws duly zinc plated. The option of cheese head screws or Philips head screws are also available.